Electrical Smart Grid Resilience Based on GSM Technology

This paper Electrical Smart Grid Resilience Based on GSM Technology is about a smart grid resilience three-phase power selector, voltage regulator, and overload protection system based on a GSM technology present three-phase power supply, solar mains, and generator sources to supply electrical energy to the load centers.

It incorporates three steps down transformers that step down the input voltage from 230V or 240V to 12V alternating current (AC). Using the AC to DC converters, this 12V AC is rectified and regulated to 5V direct current (DC), which is fed to the microcontroller as its input.

When the microcontroller receives this input of a given source, the relay module will either switch ON/OFF the system. In the event where all the three sources are present, the android app is used to select a suitable source.

When the amount of load demand exceeds the capacity of the source, the mobile app is employed to trigger the other remaining sources to meet the load demand.

The GSM module controls and sends messages to the GSM operator for any overload notifications. The operator then initiates an operation to the loads utilizing GSM by sending a text message “normal” to restore the system operation.

Electrical Smart Grid Resilience Based on GSM Technology

Let’s collaborate to write the next proposed or ongoing Article.

We believe in teamwork.

Related Articles

Responses